|
Our broadly equipped fabricating shop can
produce a diversity of sheet, plate, and structural fabrications
in steel aluminum or stainless steel. We have equipment to
shear, saw, burn to shape, bend, straighten, roll plates,
roll bars and shapes, punch, grind, and weld. Welding can
be done in house or at your location. We have equipment and
skilled personnel to do most types of welding such as metal
arc, MIG, TIG, sub-arc, silver soldering, and brazing. Our
welders are certified to American Welding Society (AWS) standards.
This department is able to handle almost any fabricating job,
large or small, new or repair, the whole thing or just pieces
and parts. You can view our machine specifications below,
and be sure to read some testimonials
from past customers.
Plate Shear
Capacity 3/8" × 12'0"
Two Press Brake
Up to 3/8" × 12'0"
Plate Roll
½" × 8'0" to 16" Dia.
3/8" or lighter gauge × 8'0" to 11" Dia
Two Angle Rolls
3" × 3" × 3/8" angle leg out to 24" ID
1½" × 1½" × 3/8" angle leg out to 13" ID
2½" × 2½" × 3/16" angle leg out to 30" OD
1½" × 1½" × 3/16" angle leg out to 14" ID
5/8" × 3" flat on edge to 36" ID
Pipe & Rod Bender
Capacity 2" XH pipe - 3" OD tube - 1¾" rod
Punch: Buffalo #½ Ironworker
Punching: 1 1/16" Dia. through 5/8" thickness
Shearing: 4" × 4" × ½ angle
Shearing: 5/8" × 6" flat
Shearing: 1 5/8" round
Welding Equipment
Arc Welders 200 to 600 amp.
TIG to 300 amp.
MIG wire feeds to 600 amp.
Innershield wire feeds to 600 amp.
Submerged arc wire feeds to 600 amp.
Spot Welder - 25 KKW
Stud Welder - 1/8" through 7/8" Dia. Studs
Bridge Crane
25 ton capacity
Floor Space
Fabrication Department 41,382 sq. ft.
|
